If the check mark symbol is already under the Bullet Library or Recently Used Bullets group, just click on it to insert into your Word document. However, if you can’t find this check mark symbol from the immediate drop-down menu, Select Define New Bullet at the bottom of the drop-down menu.

• I tried setting focausable = 'false' checkbox of recyclerview. It was working fine, i could be able to click the list item. But when I tried to add checkedChangeLstener on checkbox it blocked the list item. Now can't click on list item. @PacificSky – Sid Apr 16 '16 at 10:35.
• How to manually make a Gantt chart in Word 1. Build a basic Stacked bar graphic. Open a new Word document and set the orientation of the page from Portrait to Landscape to get more space for your Gantt chart. To do so, go to the Layout tab on the Word ribbon and click on Orientation. Go to the Insert tab and select Chart from the Illustration.

What are Conditions and Branching?

Conditions and Branching (often called skip-logic) are both types of survey logic that can determine which pages and questions of the survey are shown to certain responses, allowing for a more customized survey experience.

Conditions are rules that are applied to individual questions or message items or to entire survey pages that determine when those items or pages should be shown. Conditions can be based on answers to previous questions, user profile properties, or response properties such as the current date or survey score. For example, if a respondent gives you a poor satisfaction rating in question #1, you might want to have a follow-up question #2 that asks the reasons for their dissatisfaction. In this example, you could add a condition to question #2 so that it will only appear if the respondent gives you a 1 or 2 out of 5.

You can add one or multiple conditions to an item or page. If you have multiple conditions, you can set them as ‘And’, ‘Or’, or nested ‘And/Or’ conditions.

Branching or skip-logic is another type of survey logic that allows respondents to skip over pages of a survey or even all the way to the end of the survey. When adding a branch, you have to specify two things – where you want the respondent to branch to (e.g. page 6) and under what conditions you want the respondent to be branched there. For example, you might want to add some qualification questions on page 1 that, if not answered a certain way, would cause the respondent to exit the survey. To do this, you would add a branch from page 1 to the Completion Page of the survey. That branch would have conditions based on the answers to page one’s questions.

This guide will walk you through adding simple page conditions, item conditions, and branches.

How to Add Basic Conditions to a Question or Item

To add conditions to a survey item, click on the ‘Conditions’ tab in the survey editor. In this example, we will be creating a condition using the ‘Basic View’.

Use the Basic View when adding one or more simple conditions. Use the Advanced view for nested or compound conditions. Best hacking apps for windows.

Create your condition expression using the steps below:

1. Select the Source Type (Question, User Attribute, or Response Property)
2. Select the Source.
   – If you select “Question” as your Source Type, the Source drop-down will populate with all questions preceding this survey item. You can set conditions based on questions from the same page or a previous page. For example, you might ask a customer to rate their satisfaction level from 1-5 in question 1 and then ask a follow-up question such as “Why weren’t you satisfied?” In this example, you might add a condition to question 2 so that it only displays when the answer to question 1 is less than or equal to “2”.

   – If “User Attribute” is selected as your Source Type, the Source drop-down will populate with user attribute labels. In order to base a condition on a user attribute, the respondent must be logged in as a registered user of Checkbox. For instance, you might store a user’s department in their user profile and then set a condition to only show to users in the “Marketing” department.

   – If “Response Property” is selected as your Source Type, the Source drop-down will populate with a list of response properties. For example, you might set a question or message to display based on the score of the survey. In this case, you could set the condition so that the question or message displays if the Response Property Total Survey Score is greater than or equal to “x”.

3. Select the Comparison (operator)
4. Select/enter the Value. Depending on the comparison you selected, the Value field may appear as a drop-down, text field, or may not appear at all. If you select “Question” as your Source Type, a drop-down list will populate with the answer options for the question you selected as your Source. For open-ended questions, a text field will appear so you can type in free text.
5. Select ‘Add’ to add you condition.
6. To add more conditions, click the New Condition button. If you add more than one condition, check to make sure you have the correct radio button selected for “Any” or “All”. “Any” means that only one condition has to be true in order for the item to be displayed. “All” means that all conditions must be true in order for the condition to be displayed.

How to Add Basic Page Conditions

To add conditions to a survey page, click on the Conditions link, located to the right of the Branching link beneath your survey page number.

Create your condition using the steps outlined above. When the condition(s) are met, the entire page will be shown. Otherwise, the entire page will be hidden/skipped.

How to Add Advanced or Nested Conditions

The Advanced View is used for creating compound or nested conditions. When you have multiple condition expressions In the Basic View you select an ANY option to display the item/page when [A OR B] are true, and the ALL option to display the item/page when [A AND B]

Nested conditions mean that you want and item/page to be displayed when [A AND B] AND/OR [B AND C] are true.

In the example below, there are two scenarios where this item can be displayed:

Scenario 1 – When a respondent answers ‘Somewhat Upset’ in item 4.2 AND answers question 2.1
Scenario 2 – When a respondent answers ‘Very Upset’ in item 4.2 ANDanswers question 2.1

If either of these sets of conditions is met, the item will be displayed to the respondent.

Word For Mac - How To Add Action Item Check Box Without

How to Create a Branching Rule

To add a branching rule to a survey page, click on the ‘Branching’ link, located to the left of the ‘Conditions’ link beneath your survey page number.

NOTE: You always want to add the branch to the page you are branching FROM. Also note that you can only branch to an entire page, not to a specific question on a page. If you want to show/hide specific questions, you will want to follow the instructions above for adding conditions to your questions.

Next, select the page you wish to branch a respondent TO. The “Go to page” drop-down contains all pages after the current page, including the Completion page. Branching to the Completion page will end the survey for the respondent.

Then, select the New Condition button to create the condition(s) or rule(s) under which you want the branching to occur.

1. Select Source Type (Question, User Attribute, or Response Property)
2. Select the Source. If you select “Question” as your Source Type, the Source drop-down will populate with all questions preceding this survey item. If “User Attribute” is selected as your Source Type, the Source drop-down will populate with user attribute labels. If “Response Property” is selected as your Source Type, the Source drop-down will populate with a list of response properties.
3. Select the Comparison (operator)
4. Select/enter Value. Depending on the comparison you selected, the Value filed may appear as a drop-down, text field, or may not appear at all.
5. Select ‘Add’ to add your branching rule.

Checkboxes help us to make a checklist which resembles whether we have completed the task or it is still remaining. MS Word allows you to make a checklist with the checkboxes that are clickable. Checkbox once clicked is checked and on second click it gets unchecked. So let us see How to Insert Clickable Checkbox in MS Word 2016?

Step to Insert Clickable Checkbox in MS Word 2016:

Word For Mac - How To Add Action Item Check Box Template

Step 1: Open an MS Word document on your screen. To insert a checkbox in the document you have to add a Developer tab in the Ribbon. You can add Developer Tab in two ways either right click on any tab present on the Ribbon and among the popped options select Customize the Ribbon option, which will allow you to add Developer tab. For demonstration, I have chosen the second way. For that go the File Tab.

Step 2: Under File tab, click on the Options tab.

Step 3: A Word Options dialog box will pop out. In Word Options dialog box click on the Customize Ribbon tab present on the left-hand side of the window.

Step 4: At the right-hand side of the window you have Customize the Ribbon drop down box, select Main Tabs from there. Just below it, you can view a scroll box showing the main tabs that appear in the Ribbon. You have your Developer tab there, mark the checkbox in front of that and click OK.

Step 5: You can see that Developer tab (1) is added in Ribbon. Now, click where you want to add the checkbox (2). Then click on Check Box Content Control (3) button under Controls group of Developer tab. It will add a checkbox at the location of your cursor.

Step 6: To change the checked and unchecked symbol of your checkbox, turn ON the Design Mode. For that just click once the Design Mode button in Controls group under Developer tab.

Step 7: Now click on the checkbox of which you want to change the check and uncheck symbol and then click on Properties. You have to do this for each checkbox of which you want to change the check and uncheck symbol.

Word For Mac - How To Add Action Item Check Boxes

Step 8: A Content Control Properties dialog box will get opened. Under CheckBox Properties there is a Change button in front of Checked Symbol and Unchecked symbol. Click on that Change button.

Step 9: A Symbol dialog box will get opened. Choose a symbol and click OK. Now, click on Design Mode button to turn it OFF this is because the checkboxes won’t work until the Design Mode is ON.

Step 10: Now when you click checkbox it will turn into the symbol you had chosen.

Word For Mac - How To Add Action Item Check Boxes

Thank You. Keep reading.

Word For Mac - How To Add Action Item Check Box Excel